As a large-scale processing equipment, the CNC cutting machine requires strict operation and management due to the flammable and explosive items such as electrical aspects. In the daily use process, some safe use specifications and precautions need special attention. In order to improve the prevention awareness of enterprise users, we will summarize some of the safety details in the daily use of CNC cutting machines as follows, hoping to help you.
First of all, we must check whether the welding and cutting equipment is complete and easy to use to prevent accidents. Mainly check whether the operation and use of the acetylene generator or welding machine are normal, whether a certain water level is maintained in the tempering prevention device (including post-type tempering prevention device), whether the pressure gauge on the oxygen cylinder is firm, and the jet suction welding and cutting Whether the torch has suction power, whether there is air mixed in the acetylene generator, and whether there are any unsafe factors in the laying of the arc connecting wire. Various combustibles to prevent fire accidents caused by welding and cutting sparks. Especially the temporarily determined welding and cutting place should be thoroughly inspected, and the welding and cutting operation area should be demarcated, and the safety rope should be pulled at the operation site when necessary. The safe distance between combustibles and welding and cutting operations is generally not less than 10 meters, but the specific situation should be treated specifically, such as the size of the wind and the direction of the wind. The CNC cutting machine is used as the part of the operation, welding or cutting. In short, the welding and cutting Mars should not reach the place where combustible materials are deposited.
Check the internal structure of the welding and cutting parts, combustibles and other combustibles inside the welding and cutting to prevent explosion accidents, this is an extremely important safety preparation before welding and cutting operations. Especially for the welding and cutting parts that are temporarily taken, we must not think that the work is simple and blind welding, and we must start the welding and cutting under the condition of excluding various unsafe factors.
